Moodlyte Technologies
EcoLytes Rechargeable Candles with inductive charging system - 48 Pack
Large EcoLytes Remote™ Video
Product Sell Sheet (PDF)
Product Comparison Chart
Operating Instructions (PDF)
Distributors
Our products are distributed through RestaurantLights.com

EcoLytes™ Remote Controlled Warm White LED Candle Lamp System with Inductive charging.

COMMERCIAL QUALITY
EcoLytes™ Remote is a commercial quality flameless light engine for heavy, everyday use in the home, restaurant, catering and hospitality industry. Inductive charging base avoids all pins, prongs or bothersome slots to line up and also greatly improves the life and reliability of the product. Just drop the LED lamps into the charger slots. View EcoLytes™ REMOTE Video

REMOTE CONTROLEcoLytes Inductive Charging rechargeable LED candles 12 Pack
EcoLytes™ Remote is an inductive rechargeable table LED candle withOn/Off,selectable brightness level, flickering and Auto-Off Timer functions wirelesslycontrolled with a handheld IR remote EcoLytes Inductive Charging rechargeable LED candles 12 Packcontrol. For restaurants, EcoLytes™Remote control simply reduces labor by not requiring removal from the lamp holder or in hard-to-reach spots to turn On or Off, just use handheld remote control to save time and labor over non-remote types.

EcoLytes™ Remote operates up to 20 hours percharge and allow an unlimited number of lamp engines to be controlled throughtheInfrared signal from the handheld remote control.The warm white LED coloris closely matched to a natural flame color.

LARGE FACILITIES
Each EcoLytes™ Remote charger tray holds twelve (12) rechargeable LED lamps with a universal power adapter. Up to 4 charging trays (total of 48 candles) may be linked together using just 1 power adapter. Sold in sets with proper power adapter included.

ECO BENEFITS
Safety: eliminates fire danger and personal injury.
Rechargeable: eliminates battery disposal.
Zero Emissions: no soot or air contaminates.
Energy Reduction: produces no heat, lowering AC energy needs.
Energy Efficient: requires very little energy to operate.
Eco Sustainability: uses no fossil fuels as with candles.

PRODUCT FEATURES

 
Wireless IR Remote Controlled
Remotely control the On/Off, Flickering, Brightness, Dual Auto-Off Timer.
Inductive Charging; use no pin or prongs to ensure long life.
Flickering effect looks just like a real flame.
ON/OFF Switch on bottom of the candle cell for easy control.
Operating time of up to 20 hours, Standby up to 180hrs.
Very Bright Output illumination, natural warm white color.
Conforms to Local Fire Code regulations for "no open flame" venues.
 


PRODUCT SPECIFICATIONS
Operating Time: 8-hour charge provides up to 20 hours of use
LED Color: Candlelight
Remote control distance: Up to 30 ft.
Charger: Induction Charging
Battery Type: Internal NiMH
Charger Dimensions: 1 1/2 inches High x 4 3/4 inches Wide x 12 inches Long
LED Lamp Dimensions: 2.00 inches High x 1.57 inches Diameter
Charging Cycles: Approx. 1000 cycles (roughly 3 years of daily use). Each LED lamp has a lifetime of approx. 15,000 hours.
Input Voltage: 100-240 volts Operating Voltage: 12VDC

12 pc. Set Includes: (12) Rechargeable EcoLytes™ Remote LED Lamps, (1) Charging Base & Power Supply, (1) Handheld Remote Controller per set.

Charging Instructions:
1. Insert power supply jack into base. Plug power supply into socket.
2. Red-Green Charging indicator light illuminates Red when charging and turns Green when fully charged. Charge time is approximately 8 hours.
3. Candles are recommended for indoor use. They are not waterproof.

Remote Control Operation: (an unlimited number of LED Lamps can be used)
On – Turns on the Lamps LED for continuous operation, recalls last operating mode.
Off – Turns off the Lamps LED from any mode. (LED Lamp still uses battery power and is still operating when in “Off” mode)
4H or 8H– Will automatically turn off the LED Lamps after 4 or 8 hours respectively. Press 4H or 8H instead of the On button to activate timer mode.
Candle Mode – Pauses the flickering effect.
Light Mode – Starts the flickering effect. (best used after selecting dim or bright)
Dim – Sets the light level. (allows the maximum operating time)
Bright – Sets the light level.

 
Copyright © 2006-2013 Moodlyte.com | Powered by ekovista.com